Isnin, 17 Oktober 2011

rear brake disc adjustment

                                         
 allen key size 4 mm to adjustment fit or loose...clockwise for fit..counter  clockwise for loose..
 1st step remove bolt covering with 14mm wrench ...
Screw the adjustment screw clockwise with a 4 mm allen key until the pads hit the rotors then back out the adjustment screw counter clockwise 1/3 of a turn. The rear brake pads will have just a little bit of resistance on the rotors as you turn the rotors. Reinstall the bolt that covers the adjustment screw.

Tiada ulasan:

Catat Ulasan